For Somfy/RFY devices: follow the migration procedure carefully and do not control the motors with the old transceiver afterwards to avoid rolling-code issues.

Étapes

1. Check on the compatibility page which protocol belongs to your device.
2. Enable only the required receive protocol on the RFX web page or in RFXmngr.
3. Temporarily enable Auto Discovery when using MQTT.
4. Activate the remote control or sensor, or add the device manually with the correct MQTT topic.
5. Test the controls in Home Assistant and then disable Auto Discovery again.

Conseil

Use a fixed IP configuration, a unique Hostname/MQTT Client name and a good 5V/2A power supply for the most stable operation.

← Retour aux exemples