MQTT · exemple
Ajouter des appareils avec MQTT Auto Discovery
Faire apparaître automatiquement de nouveaux appareils dans Home Assistant.
Enable Auto Discovery, activate the remote control or sensor, then disable Auto Discovery. Use Clear IDs only when you want to rediscover all devices.
Étapes
- Check on the compatibility page which protocol belongs to your device.
- Enable only the required receive protocol on the RFX web page or in RFXmngr.
- Temporarily enable Auto Discovery when using MQTT.
- Activate the remote control or sensor, or add the device manually with the correct MQTT topic.
- Test the controls in Home Assistant and then disable Auto Discovery again.
Conseil
Use a fixed IP configuration, a unique Hostname/MQTT Client name and a good 5V/2A power supply for the most stable operation.
← Retour aux exemples