Protocols · 868 MHz
Visonic
Visonic is used for beveiliging & sensoren. With RFX-868 you can receive, control or connect supported devices to Home Assistant through MQTT.
Frequency868 MHz
ApplicationBeveiliging & sensoren
Recommended RFXRFX-868
Used by
Visonic
How do you use this with RFXCOM?
First check whether your device or brand appears in the compatibility list. Then select only the required protocol on the RFX web page. When using MQTT, enable Auto Discovery temporarily and activate the sensor, remote or motor. Once the device appears in Home Assistant, disable Auto Discovery again.