Protocols · 433,92 MHz
BlindsT20 / Ozroll
BlindsT20 / Ozroll is used for motoren. With RFX-433EMC you can receive, control or connect supported devices to Home Assistant through MQTT.
Frequency433,92 MHz
ApplicationMotors
Recommended RFXRFX-433EMC
Used by
Ozroll
How do you use this with RFXCOM?
First check whether your device or brand appears in the compatibility list. Then select only the required protocol on the RFX web page. When using MQTT, enable Auto Discovery temporarily and activate the sensor, remote or motor. Once the device appears in Home Assistant, disable Auto Discovery again.